Steam System Energy Experts
Learn more about Energy Experts and find Energy Experts for other industrial systems.
Here you will find information about Process Heating System Energy Experts. These Energy Experts are conducting energy assessments focused on steam systems at U.S. industrial plants through Save Energy Now. Full contact information is provided for each Energy Expert and, if available, a biographical summary.
Energy Experts are listed alphabetically by last name below.
C
Jack Ciesa
JCC Energy Solutions, LLC
606 Haskell Drive
Akron, OH 44333 - USA
(p) 330-285-5491 (f) 330-864-8402
jccenergy@ameritech.net
William Clark
Lincoln University
107 Borden Way
Lincoln University, PA 18020 - USA
(p) 484-371-8070 (f) 866-858-0478
bclark@energyconnectinc.com
Glenn Cunningham
Cunningham Engineering, Inc.
333 Nash Avenue
Cookeville, TN 38501 - USA
(p) 931-260-7156 (f) 931-372-6340
gtc99@charter.net
E
Jim Eggebrecht
Texas A&M Engineering
Experiment Station, WERC 214
College Station, TX 77843-3581 - USA
(p) 979-845-1508
(f) 979-862-8687
jimeggebrecht@tees.tamus.edu
H
Greg Harrell
Energy Management Services
341 Willocks Drive
Jefferson City, TN 37760 - USA
(p) 865-719-0173
(f) 865-471-6098
gregharrell@emscas.com
I
Nevena Iordanova
Armstrong Service, Inc.
8615 Commodity Circle, Suite 17
Orlando, FL 32819 - USA
(p) 407-355-4706
(f) 407-370-3399
niordanova@armstrongservice.com
J
Richard Jendrucko
University of Tennessee
Department of Mechanical, Aerospace, and Biomedical Engineering, 458 Hillvale Turn East
Knoxville, TN 37919 - USA
(p) 865-974-7682
jendrucko@utk.edu
K
Don Kazama
KWW Energy Services, L.P.
7485 Rush River Drive, Suite 710
Sacramento, CA 95831 - USA
(p) 916-6213-5568
dkazama@sbcglobal.net
Ted Kozman
Complete Oilfield Management
100 Plainfield Circle
Lafayette, LA 70503 - USA
(p) 337-280-8297 (f) 337-482-1235
kozmanta@bellsouth.net
Pawan Kumar
Prometheus Facility Resource Solutions
210 Clover Street NW
Ocean Shores, WA 98569 - USA
(p) 260-718-6700
(f) 360-289-0429
pawan.kumar@prometheusfrs.com
L
Roger Lawrence
RGL Solutions
1017 Main Campus Drive, Suite 2000
Raleigh, NC 27606 - USA
(p) 919-515-6682
rogerlawrence@rglsolutions.com
George Lee
Georgia Institute of Technology
4931 Riverside Drive, Suite 100E
Macon, GA 31210 - USA
(p) 478-471-5399
(f) 478-471-5372
george.lee@innovate.gatech.edu
M
Thomas Maheady
Borton-Lawson Engineering, Inc.
613 Baltimore Drive, Suite 300
Wilkes-Barre, PA 18702 - USA
(p) 570-821-1999
(f) 570-821-1990
tmaheady@borton-lawson.com
Bill Moir
Steam Engineering, Inc.
204 N.E. 17th Avenue
Vancouver, WA 98684-5091 - USA
(p) 503-704-7158
(f) 360-260-3820
billmoir@steamengineering.com
Jim Moore
TA Engineering
405 Frederick Road, Suite 252
Baltimore, MD 21228 - USA
(p) 410-747-9606
(f) 410-747-9609
j.moore@ta-engineering.com
Dave Morgan
Akamai Energy, LLC
12463 Rancho Bernardo Road #232
San Diego, CA 92128 - USA
(p) 858-229-6967
(f) 858-385-9284
dmorgan@akamaienergy.com
Michael B. Muller
Michael Muller - Contractor
1 John F. Kennedy Blvd., Apt. 45D
Somerset, NJ 08873 - USA
(p) 732-445-5540
mbmuller@caes.rutgers.edu
P
Riyaz Papar
Hudson Technologies
14 Split Rail Place
The Woodlands, TX 77382 - USA
(p) 281-298-0975
(f) 281298-0975
rpapar@hudsontech.com
S
Don Schmidt
GEOS, Ltd.
43 Jackson St.
Batavia, NY 14020 - USA
(p) 585-345-9851
(f) 585-345-9855
dschmidt@geosltd.com
Chris Steffy
Industrial Energy Engineering
444 Brooks Rd.
Wexford, PA 15090 - USA
(p) 412-225-0254
chris.steffy@industrialenergyengineering.com
Michael Stocki
Northeast Energy Efficiency Solutions
74 Mount Holyoke Drive
Amherst, MA 01002 - USA
(p) 413-687-7691 (f) 413-825-0408
mstocki@ne-ees.com
T
Robert Taylor
Independent Consultant
17270 Starview Drive
Northport, AL 35475 - USA
(p) 205-348-5422
(f) 205-348-6419
Roberttaylor@gmail.com
Stephen Terry
Independent Consultant
103 Whithorne Drive
Garner, NC 27529 - USA
(p) 919-662-5443
(f) 919-515-7968
sdterry@eos.ncsu.edu
Dr. Stephen Terry has B.S., M.S., and Ph.D. degrees in Mechanical Engineering from North Carolina State University (NCSU).
Dr. Terry is an Extension Specialist with the North Carolina State University Industrial Assessment Center, a DOE-funded program. As part of that program, he has worked with small- and medium-sized manufacturing plants in and around North Carolina since 1992, helping them reduce energy costs and increase energy efficiency. He is also an Instructor of several energy-related courses in the Mechanical and Civil Engineering Departments at NCSU. Dr. Terry is experienced in compressed air systems, lighting, motors, air conditioning and heat, industrial utility rate schedules, waste minimization, water treatment, and boilers and steam systems.
Dr. Terry is a DOE BestPractices Qualified Instructor for Steam Tools and is MotorMaster certified, as well as a DOE Energy Expert.
C. Thomas Tucker
Kinergetics LLC
322 West Sunset Court
Madison, WI 53705 - USA
(p) 608-442-5695
(f) 866-552-5868
ttucker@kinergetics.net
V
Ven Venkatesan
Hydro Modeling, Inc.
7742 Glynde Hill Drive
Orlando, FL 32835 - USA
(p) 407-399-9316
(f) 407-363-6859
venkatesan@vgaec.com
W
Joseph Wang
KWW Energy Services, L.P.
7485 Rush River Drive, Suite 710
Sacramento, CA 95831 - USA
(p) 916-484-3046
jbwwang@sbcglobal.net
David Wingard
MSES Consultants, Inc.
609 W. Main Street
Clarksburg, WV 26301 - USA
(p) 304-624-9700
(f) 304-622-0981
david.wingard@msesinc.com
Tony Wong
KWW Energy Services, L.P.
7485 Rush River Drive, Suite 710
Sacramento, CA 95831 - USA
(p) 530-756-5381
(f) 916-654-4304
wong5381@sbcglobal.net