Research Papers and Articles

EnergyPlus research papers and articles from 2009 through 2011 are listed below.

Bojic, M.; Nikolic, N.; Nikolic, D.; Skerlic, J.; Miletic, I. (2011). "Toward a Positive-Net-Energy Residential Building in Serbian Conditions." Applied Energy; (88:7); pp. 2407-2419.

Borgeson, S.; Brager, G. (2011). "Comfort Standards and Variations in Exceedance for Mixed-Mode Buildings." Building Research and Information; (39:2); pp. 118-133.

Cao, Y.; Li, H.; Dong, W.; Tang, Z.; Zhang, G. (2011). "Energy-Saving Performance Analysis of Distributional Building Energy System." Power and Energy Engineering Conference (APPEEC), 2011 Asia-Pacific, 25-28 March 2011. pp. 1-4.

David, M.; Donn, M.; Garde, F.; Lenoir, A. (2011). "Assessment of the Thermal and Visual Efficiency of Solar Shades." Building and Environment; (46:7); pp. 1489-1496.

Deru, M.; Bonnema, E.; Doebber, I.; Hirsch, A.; McIntyre, M.; Scheib, J. (2011). Thinking Like a Whole Building: A Whole Foods Market New Construction Case Study. NREL/TP-5500-50056. Golden, CO: National Renewable Energy Laboratory. 36 pp.

Ebrahimpour, A.; Maerefat, M. (2011). "Application of Advanced Glazing and Overhangs in Residential Buildings." Energy Conversion and Management; (52:1); pp. 212-219.

Erickson, V.L.; Carreira-Perpinan, M.A.; Cerpa, A.E. (2011). "Observe: Occupancy-Based System for Efficient Reduction of HVAC Energy." Information Processing in Sensor Networks (IPSN), 2011 10th International Conference, 12-14 April 2011. pp. 258-269.

Fang, X.; Winkler, J.; Christensen, D. (2011). Using EnergyPlus to Perform Dehumidification Analysis on Building America Homes: Preprint. NREL/JA-5500-49899. Golden, CO: National Renewable Energy Laboratory. 21 pp.

Gómez Royuela, I. (2011). Comparison of Energy Performance Rating of Dwellings in Malta Software (Eprdm) with Designbuilder : EnergyPlus Simulation Programme. Thesis: Bachelor of Industrial Engineering. University of Valladolid, Spain.

Hai-xiang, Z.; Magoule, F. (2011). "Feature Selection for Support Vector Regression in the Application of Building Energy Prediction." Applied Machine Intelligence and Informatics (SAMI), 2011 IEEE 9th International Symposium, 27-29 Jan. 2011. pp. 219-223.

Harrod, J.; Mago, P.J. (2011). "Performance Analysis of a Combined Cooling, Heating, and Power System Driven by a Waste Biomass Fired Stirling Engine." Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science; (225:C2); pp. 420-428.

Hirsch, A.; Pless, S.; Guglielmetti, R.; Torcellini, P.A.; Okada, D.; Antia, P. (2011). Role of Modeling When Designing for Absolute Energy Use Intensity Requirements in a Design-Build Framework: Preprint. NREL/CP-5500-49067. Golden, CO: National Renewable Energy Laboratory. 12 pp.

Hopkins, A.S.; Lekov, A.; Lutz, J.; Rosenquist, G.; Gu, L. (2011). Simulating a Nationally Representative Housing Sample Using EnergyPlus. LBNL-4420E. Berkeley, CA (US): Ernest Orlando Lawrence Berkeley National Laboratory. 55 pp.

Hu, J.; Olbina, S. (2011). "Illuminance-Based Slat Angle Selection Model for Automated Control of Split Blinds." Building and Environment; (46:3); pp. 786-796.

Huang, Y.; Gowri, K. (2011). Comparison of 2006 Iecc and 2009 Iecc Commercial Energy Code Requirements for Kansas City, Mo. PNNL-20263. Richland, WA (US): Pacific Northwest National Laboratory (PNNL). 35 pp.

Hwang, R.-l.; Hsu, H.-y. (2011). "Comparison of the Evaluation Method for Building Energy Consumption in Taiwan-Eewh with Usgbc-Leed Green Building Rating System." Consumer Electronics, Communications and Networks (CECNet), 2011 International Conference, 16-18 April 2011. pp. 2058-2061.

Jie, Z.; Sheng-xia, Y. (2011). "The Impact of External Shading on Energy Saving of the Residential Building." Consumer Electronics, Communications and Networks (CECNet), 2011 International Conference, 16-18 April 2011. pp. 2748-2751.

Jingran, M.; Qin, S.J.; Bo, L.; Salsbury, T. (2011). "Economic Model Predictive Control for Building Energy Systems." 2011 IEEE PES Innovative Smart Grid Technologies (ISGT 2011), Hilton Anaheim, CA. pp. 6.

May-Ostendorp, P.; Henze, G.P.; Corbin, C.D.; Rajagopalan, B.; Felsmann, C. (2011). "Model-Predictive Control of Mixed-Mode Buildings with Rule Extraction." Building and Environment; (46:2); pp. 428-437.

Mun, J.; Krarti, M. (2011). "An Ice Rink Floor Thermal Model Suitable for Whole-Building Energy Simulation Analysis." Building and Environment; (46:5); pp. 1087-1093.

Polly, B.; Gestwick, M.; Bianchi, M.; Anderson, R.; Horowitz, S.; Christensen, C.; Judkoff, R. (2011). Method for Determining Optimal Residential Energy Efficiency Retrofit Packages. DOE/GO-102011-3261. Golden, CO: U. S. Dept. of Energy/National Renewable Energy Laboratory. 79 pp.

Reinhart, C.F.; Wienold, J. (2011). "The Daylighting Dashboard - a Simulation-Based Design Analysis for Daylit Spaces." Building and Environment; (46:2); pp. 386-396.

Schiavon, S.; Lee, K.H.; Bauman, F.; Webster, T. (2011). "Simplified Calculation Method for Design Cooling Loads in Underfloor Air Distribution (Ufad) Systems." Energy and Buildings; (43:2-3); pp. 517-528.

Shi, X. (2011). "Design Optimization of Insulation Usage and Space Conditioning Load Using Energy Simulation and Genetic Algorithm." Energy; (36:3); pp. 1659-1667.

Smith, A.; Fumo, N.; Luck, R.; Mago, P.J. (2011). "Robustness of a Methodology for Estimating Hourly Energy Consumption of Buildings Using Monthly Utility Bills." Energy and Buildings; (43:4); pp. 779-786.

Thornton, B.A.; Rosenberg, M.I.; Richman, E.E.; Wang, W.; Xie, Y.; Zhang, J.; Cho, H.; Mendon, V.V.; Athalye, R.A.; Liu, B. (2011). Achieving the 30% Goal: Energy and Cost Savings Analysis of Ashrae Standard 90.1-2010. PNNL-20405; Other: BT0703000. Richland, WA (US): Pacific Northwest National Laboratory (PNNL). 368 pp.

Wang, Z.Q.; Zhang, J.S. (2011). "Characterization and Performance Evaluation of a Full-Scale Activated Carbon-Based Dynamic Botanical Air Filtration System for Improving Indoor Air Quality." Building and Environment; (46:3); pp. 758-768.

Xin, L.; Neng, Z.; Ren-dong, G. (2011). "Application of Natural Ventilation in Green Building." Electric Technology and Civil Engineering (ICETCE), 2011 International Conference, 22-24 April 2011. pp. 2941-2944.

Yu, W.; Li, N.; Zhang, W.; Qian, F. (2011). "Case Study on Sustainable Building Design." Electric Technology and Civil Engineering (ICETCE), 2011 International Conference, 22-24 April 2011. pp. 2984-2987.

Zhengyi, L.; Zhaoyi, H.; Hongchao, Y. (2011). "Optimization and Analysis of Operation Strategies for Combined Cooling, Heating and Power System." Power and Energy Engineering Conference (APPEEC), 2011 Asia-Pacific, 25-28 March 2011. pp. 1-4.

Zhou, Z.; Yang, G.; Zhang, X. (2011). "Temperature Change of Underground in the Long Running of Vertical Ground-Coupled Heat Pump." Electric Technology and Civil Engineering (ICETCE), 2011 International Conference, 22-24 April 2011. pp. 1643-1646.

Assem, E.O.; Al-Mumin, A.A. (2010). "Code Compliance of Fully Glazed Tall Office Buildings in Hot Climate." Energy and Buildings; (42:7); pp. 1100-1105.

Athalye, R.A.; Gowri, K.; Glazer, J.; Schultz, R.W. (2010). Quicksim Analysis Report. PNNL-19961. Richland, WA: Pacific Northwest National Laboratory. 56 pp.

Beck, A.; Jazdi, N. (2010). "Model-Based Electrical Energy Analysis of Industrial Automation Systems." Automation Quality and Testing Robotics (AQTR), 2010 IEEE International Conference, 28-30 May 2010. pp. 1-6.

Beghi, A.; Cecchinato, L.; Rampazzo, M.; Simmini, F. (2010). "Load Forecasting for the Efficient Energy Management of HVAC Systems." Sustainable Energy Technologies (ICSET), 2010 IEEE International Conference, 6-9 Dec. 2010, Kandy, Sri Lanka. pp. 1-6.

Bonnema, E. (2010). Large Hospital 50% Energy Savings Technical Support Document. NREL/TP-550-47867. Golden, CO: National Renewable Energy Laboratory. xiv, 170 pp.

Brychta, M.; Dubisch, F.; Stift, F.; Palensky, P. (2010). "QUEEN: A Novel Design Flow and Decision Support Tool for Sustainable Buildings." IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society, 7-10 Nov. 2010. pp. 2448-2453.

Bueno Unzeta, B. (2010). An Urban Weather Generator Coupling a Building Simulation Program with an Urban Canopy Model. Thesis (M.S.). Massachusetts Institute of Technology.

Cardinale, N.; Rospi, G.; Stazi, A. (2010). "Energy and Microclimatic Performance of Restored Hypogeous Buildings in South Italy: The "Sassi" District of Matera." Building and Environment; (45:1); pp. 94-106.

Cardinale, N.; Stefanizzi, P.; Rospi, G.; Augenti, V. (2010). "Thermal Performance of a Mobile Home with Light Envelope." Building Simulation; (3:4); pp. 331-338.

Chan, A.L.S.; Chow, T.T. (2010). "Investigation on Energy Performance and Energy Payback Period of Application of Balcony for Residential Apartment in Hong Kong." Energy and Buildings; (42:12); pp. 2400-2405.

Chen, J.; Xue, Q.; Qiao, W.; An, E. (2010). "Energy Saving Analysis of a Hybrid Ground-Coupled Heat Pump Project." Journal of Southeast University (English Edition); (26:2); pp. 177-81.

Chen, T.; Cui, M. (2010). "A RTS-Based Method for Direct and Consistent Calculating Intermittent Peak Cooling Loads." Energy Conversion and Management; (51:6); pp. 1170-8.

Chun-long, Z.; An-zhong, D.; Yong, C.; Sheng-bo, L.; Hong-yu, Z.; Guo-zhi, F. (2010). "Validation of Veracity on Simulating the Indoor Temperature in PCM Light Weight Building by EnergyPlus." Life System Modeling and Intelligent Computing. Proceedings International Conference on Life System Modeling and Simulation, LSMS 2010, and International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2010, Wuxi, China; (6328/2010 pp. 486-96|xxii+518.

Di Vincenzo, M.C.; Kesten, D.; Infield, D. (2010). "Assessment of Performance of Building Shading Device with Integrated Photovoltaics in Different Urban Scenarios." Sustainable Energy Technologies (ICSET), 2010 IEEE International Conference, 6-9 Dec. 2010. pp. 1-5.

Dudley, J.H.; Black, D.; Apte, M.; Piette, M.A.; Berkeley, P. (2010). Comparison of Demand Response Performance with an EnergyPlus Model in a Low Energy Campus Building. LBNL-3644E. Berkeley, CA (US): Ernest Orlando Lawrence Berkeley National Laboratory. 14 pp.

Fang, X.; Winkler, J.; Christensen, D. (2010). Advanced Dehumidification Analysis on Building America Homes Using EnergyPlus: Preprint. NREL/CP-550-48383. Golden, CO: National Renewable Energy Laboratory. 11 pp.

Fei, Z.; Wang, J.; Koritarov, V.; Augenbroe, G. (2010). "Agent-Based Modeling of Interaction between Commercial Building Stocks and Power Grid." Innovative Technologies for an Efficient and Reliable Electricity Supply (CITRES), 2010 IEEE Conference, 27-29 Sept. 2010. pp. 225-232.

Field, K.; Deru, M.; Studer, D. (2010). Using DOE Commercial Reference Buildings for Simulation Studies: Preprint. NREL/CP-550-48588. Golden, CO: National Renewable Energy Laboratory. 12 pp.

Fumo, N.; Mago, P.; Luck, R. (2010). "Methodology to Estimate Building Energy Consumption Using EnergyPlus Benchmark Models." Energy and Buildings; (42:12); pp. 2331-2337.

Garg, V.; Chandrasen, K.; Tetali, S.; Mathur, J. (2010). "Energyplus Simulation Speedup Using Data Parallelization Concept." ASME Energy Sustainability Conference, New York: American Society of Mechanical Engineers. pp. 1041-1048.

Gervasio, H.; Santos, P.; da Silva, L.S.; Lopes, A.M.G. (2010). "Influence of Thermal Insulation on the Energy Balance for Cold-Formed Buildings." Advanced Steel Construction; (6:2); pp. 742-766.

Guo, W.; Nutter, D.W. (2010). "Setback and Setup Temperature Analysis for a Classic Double-Corridor Classroom Building." Energy and Buildings; (42:2); pp. 189-197.

Herrman, L.; Deru, M.; Zhai, J. (2010). Evaluating Energy Performance and Improvement Potential of China Office Buildings in the Hot Humid Climate against U.S. Reference Buildings: Preprint. NREL/CP-550-48440. Golden, CO: National Renewable Energy Laboratory. 12 pp.

Hong, T.; Fisk, W.J. (2010). "Assessment of Energy Savings Potential from the Use of Demand Controlled Ventilation in General Office Spaces in California." Building Simulation; (3:2); pp. 117-124.

Huizhi, Z.; Bo, L.; Ya, F. (2010). "The Indoor Environment of Passive Solar Heating in High Altitude Localities." Bioinformatics and Biomedical Engineering (iCBBE), 2010 4th International Conference, 18-20 June 2010. pp. 1-4.

Huizhi, Z.; Bo, L.; Ya, F. (2010). "Research on the Phase Change Materials for the Passive Solar House in Tibet." Mechanic Automation and Control Engineering (MACE), 2010 International Conference, 26-28 June 2010. pp. 4070-4073.

Jian, X.; Guoqiang, Z.; Jin, Z.; Feng, X. (2010). "The Influence of Wall's Insulation Thickness to Building Energy Consumption." Mechanic Automation and Control Engineering (MACE), 2010 International Conference, 26-28 June 2010. pp. 4241-4244.

Jo, J.H.; Carlson, J.D.; Golden, J.S.; Bryan, H. (2010). "An Integrated Empirical and Modeling Methodology for Analyzing Solar Reflective Roof Technologies on Commercial Buildings." Building and Environment; (45:2); pp. 453-460.

Johnson, M.-H.D. (2010). Assess and Implement Natural and Hybrid Ventilation Models in Whole-Building Energy Simulations. Thesis (M.S.). Boulder, CO, University of Colorado at Boulder.

Johnston, D.; Bentley, E.; Narayana, M.; Tianxiang, J.; Suwanapingkarl, P.; Putrus, G. (2010). "Electric Vehicles as Storage Devices for Supply-Demand Management." Vehicle Power and Propulsion Conference (VPPC), 2010 IEEE, 1-3 Sept. 2010. pp. 1-6.

Jongug, J.; Sunil, L.; Daehie, H.; Yongchan, K. (2010). "Performance Evaluation and Modeling of a Hybrid Cooling System Combining a Screw Water Chiller with a Ground Source Heat Pump in a Building." Energy; (35:5); pp. 2006-12.

Kiliccote, S.; Piette, M.A.; Yin, R.; Parrish, K. (2010). Scenario Analysis of Peak Demand Savings for Commercial Buildings with Thermal Mass in California. LBNL-3636E. Berkeley, CA: Lawrence Berkeley National Laboratory. Environmental Energy Technologies Division. 15 pp.

Leach, M. (2010). Technical Support Document Strategies for 50% Energy Savings in Large Office Buildings. NREL/TP-550-49213. Golden, CO: National Renewable Energy Laboratory. xviii, 141 pp.

Li, Y.; Lu, L.; Yang, H. (2010). "Energy and Economic Performance Analysis of an Open Cycle Solar Desiccant Dehumidification Air-Conditioning System for Application in Hong Kong." Solar Energy; (84:12); pp. 2085-2095.

Li, Y.M.; Wu, J.Y. (2010). "Energy Simulation and Analysis of the Heat Recovery Variable Refrigerant Flow System in Winter." Energy and Buildings; (42:7); pp. 1093-1099.

Li, Y.M.; Wu, J.Y.; Shiochi, S. (2010). "Experimental Validation of the Simulation Module of the Water-Cooled Variable Refrigerant Flow System under Cooling Operation." Applied Energy; (87:5); pp. 1513-21.

Lollini, R.; Danza, L.; Meroni, I. (2010). "Energy Efficiency of a Dynamic Glazing System." Solar Energy; (84:4); pp. 526-537.

Long, N.; Bonnema, E.; Field, K.; Torcellini, P. (2010). Evaluation of Ansi/Ashrae/Usgbc/Ies Standard 189.1-2009. NREL/TP-550-47906. Golden, CO: National Renewable Energy Laboratory. 55 pp.

Luo, C.; Moghtaderi, B.; Page, A. (2010). "Modelling of Wall Heat Transfer Using Modified Conduction Transfer Function, Finite Volume and Complex Fourier Analysis Methods." Energy and Buildings; (42:5); pp. 605-617.

Maile, T. (2010). Comparing Measured and Simulated Building Energy Performance Data. Thesis (Ph.D.). Stanford University.

Mathew, P.A.; Clear, R.; Kircher, K.; Webster, T.; Lee, K.H.; Hoyt, T. (2010). "Advanced Benchmarking for Complex Building Types Laboratories as an Exemplar." American Council for an Energy-Efficient Economy (ACEEE) Summer Study 2010, 8/20/2010 - 8/24/2010, Pacific Grove, CA: Lawrence Berkeley National Laboratory.

Pan, Y.; Li, Y.; Huang, Z.; Wu, G. (2010). "Study on Simulation Methods of Atrium Building Cooling Load in Hot and Humid Regions." Energy and Buildings; (42:10); pp. 1654-1660.

Peng, Z.; Suryanarayanan, S.; Simo; x; es, M.G. (2010). "An Energy Management System for Building Structures Using a Multi-Agent Decision-Making Control Methodology." Industry Applications Society Annual Meeting (IAS), 2010 IEEE, 3-7 Oct. 2010. pp. 1-8.

Qing, M.; Qi-qiang, L. (2010). "Demand Shedding with Thermal Mass in Office Buildings." 2010 8th World Congress on Intelligent Control and Automation (WCICA 2010). pp. 4060-4.

Qiong, L.; Qinglin, M. (2010). "Development and Application of Hourly Building Cooling Load Prediction Model." Advances in Energy Engineering (ICAEE), 2010 International Conference, 19-20 June 2010. pp. 392-395.

Ramos, G.; Ghisi, E. (2010). "Analysis of Daylight Calculated Using the EnergyPlus Programme." Renewable & Sustainable Energy Reviews; (14:7); pp. 1948-1958.

Roetzel, A.; Tsangrassoulis, A.; Dietrich, U.; Busching, S. (2010). "On the Influence of Building Design, Occupants and Heat Waves on Comfort and Greenhouse Gas Emissions in Naturally Ventilated Offices. A Study Based on the En 15251 Adaptive Thermal Comfort Model in Athens, Greece." Building Simulation; (3:2); pp. 87-103.

Schiavon, S.; Lee, K.H.; Bauman, F.; Webster, T. (2010). "Influence of Raised Floor on Zone Design Cooling Load in Commercial Buildings." Energy and Buildings; (42:8); pp. 1182-1191.

Seo, D. (2010). Development of a Universal Model for Predicting Hourly Solar Radiation—Application: Evaluation of an Optimal Daylighting Controller. Thesis (Ph.D.). Boulder, CO, University of Colorado at Boulder.

Sherman, M.H.; Wray, C.P. (2010). "Duct Leakage Modeling in EnergyPlus and Analysis of Energy Savings from Implementing Sav with Incitetm." pp. iv, 152.

Stovall, T.K.; Kosny, J.; Yarbrough, D.W.; Shrestha, S.S. (2010). Theoretical and Experimental Thermal Performance Analysis of Complex Thermal Storage Membrane Containing Bio-Based Phase Change Material (PCM). Oak Ridge, TN: Oak Ridge National Laboratory.

Wei, J.S.; Zhao, J.N.; Chen, Q.Y. (2010). "Energy Performance of a Dual Airflow Window under Different Climates." Energy and Buildings; (42:1); pp. 111-122.

Wong, E.S.W.; Zaiyi, L. (2010). "Investigating the Impact of Thermal Mass on Building Performance Using Computational Simulation." Advanced Management Science (ICAMS), 2010 IEEE International Conference, 9-11 July 2010. pp. 11-15.

Wong, S.L.; Wan, K.K.W.; Lam, T.N.T. (2010). "Artificial Neural Networks for Energy Analysis of Office Buildings with Daylighting." Applied Energy; (87:2); pp. 551-557.

Xia, M.; Fang, Q.-s.; Wang, X.-l.; Yang, Y.-l.; Li, S.-s. (2010). "Module Emendation Research in the Building Energy Simulation Program of EnergyPlus Based on the Pso Algorithm." 2010 International Conference on Mechanic Automation and Control Engineering (MACE). pp. 4714-16.

Yang, C.; Jin, X.-q.; Du, Z.-m.; Fan, B.; Yang, X.-b. (2010). "Modeling and Simulation of the Airport Terminal Air Conditioning System Based on Energyplus." Journal of Shanghai Jiaotong University; (44:6); pp. 745-8, 754.

Yu, J.K. (2010). A Study of Time-Dependent Responses of a Mechanical Displacement Ventilation (Dv) System and an Underfloor Air Distribution (Ufad) System Building Energy Performance of the Ufad System. Dissertation: Ph.D. La Jolla, CA, University of California, San Diego.

Aynur, T.N.; Hwang, Y.; Radermacher, R. (2009). "Simulation of a VAV Air Conditioning System in an Existing Building for the Cooling Mode." Energy and Buildings; (41:9); pp. 922-929.

Beghi, A.; Bertinato, M.; Cecchinato, L.; Rampazzo, M. (2009). "A Multi-Phase Genetic Algorithm for the Efficient Management of Multi-Chiller Systems." Asian Control Conference, 2009. ASCC 2009. 7th, 27-29 Aug. 2009. pp. 1685-1690.

Cao, R.-g.; You, S.-j.; Dong, S.-y. (2009). "Experimental Investigation and Energy Consumption Analysis for Subway Side-Platform in North Cities." Journal of Central South University of Technology; (16 pp. 235-238.

Chan, A.L.S.; Chow, T.T.; Fong, K.F.; Lin, Z. (2009). "Investigation on Energy Performance of Double Skin Facade in Hong Kong." Energy and Buildings; (41:11); pp. 1135-1142.

Chan, T.-y.J. (2009). Investigation on Simulating the Performance of Building Integrated Photovoltaic (Bipv) by Using EnergyPlus. Thesis (M.Eng.). Hong Kong, Hong Kong Polytechnic University.

Chowdhury, A.A.; Rasul, M.G.; Khan, M.M.K. (2009). "Modelling and Analysis of Air-Cooled Reciprocating Chiller and Demand Energy Savings Using Passive Cooling." Applied Thermal Engineering; (29:8-9); pp. 1825-1830.

Christensen, D.W.J. (2009). Laboratory Test Report for Thermastor Ultra-Aire Xt150h Dehumidifier. NREL/TP-550-47215. Golden, CO : National Renewable Energy Laboratory. 26 pp.

Cobelo, I.; Boyra, M.; Castellanos, A. (2009). "Commercial Building Load Modelling for Demand Response Applications." Electricity Distribution - Part 1, 2009. CIRED 2009. 20th International Conference and Exhibition, 8-11 June 2009. pp. 1-4.

de Wilde, P.; Tian, W. (2009). "Identification of Key Factors for Uncertainty in the Prediction of the Thermal Performance of an Office Building under Climate Change." Building Simulation; (2:3); pp. 157-174.

Golasangimath, D.V. (2009). Thermal and Daylighting Performance of Automated Split-Controlled Blinds. Thesis (M.S.B.C.). Gainesville, FL, University of Florida.

Gowri, K.; Winiarski, D.W.; Jarnagin, R.E. (2009). Infiltration Modeling Guidelines for Commercial Building Energy Analysis. PNNL-18898. Richland, WA (US): Pacific Northwest National Laboratory (PNNL). 21 pp.

Issa, R.R.A.; Suermann, P.C.; Olbina, S. (2009). "Use of Building Information Models in Simulations." Winter Simulation Conference (WSC), Proceedings of the 2009, 13-16 Dec. 2009. pp. 2664-2671.

Leao, M.; Huckemann, V.; Leao, E.B.; Fisch, M.N.; Kuchen, E. (2009). "Energy Efficiency of Double Skin Facades: An Approach to Brazilian Climates." Bauphysik; (31:6); pp. 366-373.

Lee, K.H.; Strand, R.K. (2009). "Enhancement of Natural Ventilation in Buildings Using a Thermal Chimney." Energy and Buildings; (41:6); pp. 615-621.

Li, Y.; Wu, J.; Shiochi, S. (2009). "Modeling and Energy Simulation of the Variable Refrigerant Flow Air Conditioning System with Water-Cooled Condenser under Cooling Conditions." Energy and Buildings; (41:9); pp. 949-57.

Loutzenhiser, P.G.; Manz, H.; Moosberger, S.; Maxwell, G.A. (2009). "An Empirical Validation of Window Solar Gain Models and the Associated Interactions." International Journal of Thermal Sciences; (48:1); pp. 85-95.

Marnay, C.; Lai, J.; Stadler, M.; Siddiqui, A. (2009). "Added Value of Reliability to a Microgrid: Simulations of Three California Buildings." Integration of Wide-Scale Renewable Resources Into the Power Delivery System, 2009 CIGRE/IEEE PES Joint Symposium, 29-31 July 2009. pp. 1-8.

Melki, S.; Hayek, M. (2009). "Building Simulation Tools and Their Role in Improving Existing Building Designs." 2009 International Conference on Advances in Computational Tools for Engineering Applications (ACTEA), 15-17 July 2009. pp. 503-7|319.

Mendon, V.V. (2009). Energy Modeling and Analysis of the Wrcnc Building on Ncsu's Centennial Campus. Thesis (M.S.). North Carolina State University.

Ochoa, C.E.; Capeluto, I.G. (2009). "Advice Tool for Early Design Stages of Intelligent Facades Based on Energy and Visual Comfort Approach." Energy and Buildings; (41:5); pp. 480-488.

Ruiz, N.; Cobelo, I.; Oyarzabal, J. (2009). "A Direct Load Control Model for Virtual Power Plant Management." Power Systems, IEEE Transactions; (24:2); pp. 959-966.

Sharma, C. (2009). Development of Dry and Evaporative Fluid Cooper Models for EnergyPlus. Thesis: M.S. Stillwater, OK, Oklahoma State University.

Shen, E.; Hong, T. (2009). "Simulation-Based Assessment of the Energy Savings Benefits of Integrated Control in Office Buildings." Building Simulation; (2:4); pp. 239-251.

Tian, Z.; Love, J.A. (2009). "Energy Performance Optimization of Radiant Slab Cooling Using Building Simulation and Field Measurements." Energy and Buildings; (41:3); pp. 320-330.

Urban, R.A.; Bakshi, B.R. (2009). "Technological-Ecological Networks for Sustainable Process Design." Sustainable Systems and Technology, 2009. ISSST '09. IEEE International Symposium, 18-20 May 2009. pp. 1-6.

Wang, L.; Gwilliam, J.; Jones, P. (2009). "Case Study of Zero Energy House Design in Uk." Energy and Buildings; (41:11); pp. 1215-1222.

Wang, N.; Esram, T.; Martinez, L.A.; McCulley, M.T. (2009). "A Marketable All-Electric Solar House: A Report of a Solar Decathlon Project." Renewable Energy; (34:12); pp. 2860-2871.

Wang, Z.; Yi, L.; Gao, F. (2009). "Night Ventilation Control Strategies in Office Buildings." Solar Energy; (83:10); pp. 1902-13.

Wankanapon, P. (2009). The Impact of Translucent Fabric Shades and Control Strategies on Energy Savings and Visual Quality. Thesis (Ph.D.). University Park, PA, Pennsylvania State University.

Wetter, M.; Kamph, J.H.; Robinson, D. (2009). "A Comparison of Global Optimization Algorithms with Standard Benchmark Functions and Real-World Applications Using Energy Plus."

Zhang, W.; Liu, J.; Jia, J. (2009). "City Energy Management by AC Commissioning." Management and Service Science, 2009. MASS '09. International Conference, 20-22 Sept. 2009. pp. 1-4.

Zhang, W.; Liu, J.; Jia, J. (2009). "Commissioning on AC Design Norms on the Aspect of Energy Consumption Characteristics." Energy and Environment Technology, 2009. ICEET '09. International Conference, 16-18 Oct. 2009. pp. 59-62.

Bazjanac, V. (2008). "Ifc Bim-Based Methodology for Semi-Automated Building Energy Performance Simulation." pp. 13.

Chowdhury, A.A.; Rasul, M.G.; Khan, M.M.K. (2008). "Thermal-Comfort Analysis and Simulation for Various Low-Energy Cooling-Technologies Applied to an Office Building in a Subtropical Climate." Applied Energy; (85:6); pp. 449-462.

Cobelo, I.; Rodriguez, J.E.; Boyra, M.; Anduaga, J.; Castellanos, A. (2008). "Economical and Technical Viability of Demand Response in the Spanish Power System: The "Optiges" Project." SmartGrids for Distribution, 2008. IET-CIRED. CIRED Seminar, 23-24 June 2008, Frankfurt. pp. 1-4.

Find more research papers and articles from: